The following limitation in previous versions has been resolved:

The following limitations in previous versions have been resolved:

The following limitations in previous versions have been resolved:

The operating system and software requirements for VoltDB have been updated based on changes to the supported versions of the underlying technologies. Specifically:

As mentioned earlier, the addition of the role attribute to the <dr> element in the configuration file eliminates the need for the SET DR=ACTIVE SQL statement and the --replica argument to the voltdb start command. In addition, two columns for the local and remote cluster IDs have been added to the DRPRODUCER and DRCONSUMER selectors for the @Statistics system procedure. The new columns make it easier to identify to which DR connection the current row of data applies. However, their presence also changes the order of columns from previous releases. If an application used the DRPRODUCER or DRCONSUMER selectors and retrieves column values by index instead of by name, the application will need to be modified to accommodate the new columns in the results.

Previously, VoltDB allowed any 8-byte integer as input to a TIMESTAMP column. However, the TIMESTAMP functions limit the values to those defined by the MIN_VALID_TIMESTAMP() and MAX_VALID_TIMESTAMP() functions. Starting with V7.0, VoltDB no longer accepts values outside of the valid timestamp range for TIMESTAMP columns.

Note that this is an incompatible change and may require changes to applications that are inadvertently inserting invalid timestamp values. If so, you can use the IS_VALID_TIMESTAMP() function to validate input values before inserting them into TIMESTAMP columns.

In addition to the new features and capabilities described above, the following limitations in previous versions have been resolved:

VoltDB reserves the subfolder "segments" under the command log directory for storing the actual command log files. Do not add, remove, or modify any files in this directory. In particular, do not set the command log snapshot directory to a subfolder "segments" of the command log directory, or else the server will hang on startup.

Because DR data is buffered on the master database and then delivered asynchronously to the replica, there is always the danger that data does not reach the replica if a master node stops. This situation is mitigated in a K-safe environment by all copies of a partition buffering on the master cluster. Then if a sending node goes down, another node on the master database can take over sending logs to the replica. However, if multiple nodes go down and rejoin in rapid succession, it is possible that some buffered DR data — from transactions when one or more nodes were down — could be lost when another node with the last copy of that buffer also goes down.

If this occurs and the replica recognizes that some binary logs are missing, DR stops and must be restarted.

To avoid this situation, especially when cycling through nodes for maintenance purposes, the key is to ensure that all buffered DR data is transmitted before stopping the next node in the cycle. You can do this using the @Statistics system procedure to make sure the last ACKed timestamp (using @Statistitcs DR on the master cluster) is later than the timestamp when the previous node completed its rejoin operation.

Bulk operations, such as large deletes, inserts, or updates are possible within a single stored procedure. However, if the binary logs generated for DR are larger than 45MB, the operation will fail. To avoid this situation, it is best to break up large bulk operations into multiple, smaller transactions. A general rule of thumb is to multiply the size of the table schema by the number of affected rows. For deletes and inserts, this value should be under 45MB to avoid exceeding the DR binary log size limit. For updates, this number should be under 22.5MB (because the binary log contains both the starting and ending row values for updates).

There are a number of VoltDB features that help manage the database by constraining memory size and resource utilization. These features are extremely useful in avoiding crashes as a result of unexpected or unconstrained growth. However, these features could interfere with the normal operation of DR when passing data from one cluster to another, especially if the two clusters are different sizes. Therefore, as a general rule of thumb, DR overrides these features in favor of maintaining synchronization between the two clusters.

Specifically, DR ignores any resource monitor limits defined in the deployment file when applying binary logs on the consumer cluster. DR also ignores any partition row limits defined in the database schema when applying binary logs. This means, for example, if the replica database in passive DR has less memory or fewer unique partitions than the master, it is possible that applying binary logs of transactions that succeeded on the master could cause the replica to run out of memory. Note that these resource monitor and tables row limits are applied on any original transactions local to the cluster (for example, transactions on the master database in passive DR).

Database Replication (DR) now supports replication across clusters of different sizes. However, if the replica cluster is smaller than the master cluster, it may require a significantly larger Java heap setting. Specifically, if the replica has fewer unique partitions than the master, each partition on the replica must manage the incoming binary logs from more partitions on the master, which places additional pressure on the Java heap.

A simple rule of thumb is that the worst case scenario could require an additional P * R * 20MB space in the Java heap , where P is the number of sites per host on the replica server and R is the ratio of unique partitions on the master to partitions on the replica. For example, if the master cluster is 5 nodes with 10 sites per host and a K factor of 1 (i.e. 25 unique partitions) and the replica cluster is 3 nodes with 8 sites per host and a K factor of 1 (12 unique partitions), the Java heap on the replica cluster may require approximately 320MB of additional space in the heap:

An alternative is to reduce the size of the DR buffers on the master cluster by setting the DR_MEM_LIMIT Java property. For example, you can reduce the DR buffer size from the default 10MB to 5MB using the VOLTDB_OPTS environment variable before starting the master cluster.

Changing the DR buffer limit on the master from 10MB to 5MB proportionally reduces the additional heap size needed. So in the previous example, the additional heap on the replica is reduced from 320MB to 160MB.

Part of the replication process for XDCR is to verify that the record's starting and ending states match on both clusters, otherwise known as conflict resolution. To do that, XDCR must find the record first. Finding uniquely indexed records is efficient; finding non-unique records is not and can impact overall database performance.

To make you aware of possible performance impact, VoltDB issues a warning if you declare a table as a DR table and it does not have a unique index.

You cannot start XDCR if both databases already have data in the DR tables. Only one of the two participating databases can have preexisting data when DR starts for the first time.

When starting XDCR for the first time, where one database already contains data, a snapshot of that data is sent to the other database. While receiving and processing that snapshot, the receiving database is paused. That is, it is in read-only mode. Once the snapshot is completed and the two database are synchronized, the receiving database is automatically unpaused, resuming normal read/write operations.

Normally, XDCR will automatically restart where it left off after one of the clusters stops and recovers from its command logs (using the voltdb recover command). However, if the workload is predominantly multi-partition write transactions, a failed cluster may not be able to restart XDCR after it recovers. In this case, XDCR must be restarted from scratch, using the content from one of the clusters as the source for synchronizing and recreating the other cluster (using the voltdb create --force command) without any content in the DR tables.

When using XDCR, if the binary log from one cluster includes a TRUNCATE TABLE statement and the other cluster performs any write operation to the same table before the binary log is processed, the TRUNCATE TABLE operation will be reported as a conflict. Note that currently DELETE operations always supercede other actions, so the TRUNCATE TABLE will be executed on both clusters.

It is possible to place a limit on the number of rows that any partition can hold for a specific table using the LIMIT PARTITION ROWS clause of the CREATE TABLE statement. When close to the limit, transactions on either or both clusters can exceed the limit simultaneously, resulting in a potentially large number of delete operations that then generate conflicts when the the associated binary log reaches the other cluster.

VoltDB provides a way to generate a deterministically unique ID within a stored procedure using the getUniqueId method. This method guarantees uniqueness within the current cluster. However, the method could generate the same ID on two distinct database clusters. Consequently, when using XDCR, you should combine the return values of VoltProcedure.getUniqueId with VoltProcedure.getClusterId, which returns the current cluster's unique DR ID, to generate IDs that are unique across all clusters in your environment.

You cannot use cross-datacenter replication (XDCR) with the deprecated export syntax, that is the EXPORT TABLE statement. To use XDCR with export, you must use the current CREATE STREAM syntax for declaring the source streams for export targets.

A bug in the Apache Kafka client can result in file descriptors being allocated but not released if the producer.type attribute is set to "sync" (which is the default). The consequence is that the system eventually runs out of file descriptors and the VoltDB server process will crash.

Until this bug is fixed, use of synchronous Kafka export is not recommended. The workaround is to set the Kafka producer.type attribute to "async" using the VoltDB export properties.

If, while Kafka import is enabled, the Kafka broker that VoltDB is connected to stops (for example, if the server crashes or is taken down for maintenance), some messages may be lost between Kafka and VoltDB. To ensure no data is lost, we recommend you disable VoltDB import before taking down the associated Kafka broker. You can then re-enable import after the Kafka broker comes back online.

There is an issue with Kafka and the VoltDB Kafka importer where the current pointer in the Kafka queue gets reset to zero. The consequence of this event is that items in the queue get imported a second time resulting in duplicate entries. This issue will be addressed in an upcoming release. In the meantime, if you are using the Kafka importer, contact support@voltdb.com for details.

When entering a multi-line statement at the sqlcmd prompt, if a line ends in a comment (indicated by two hyphens) and the comment contains an unmatched single quote character, the following lines of input are not interpreted correctly. Specifically, the comment is incorrectly interpreted as continuing until the next single quote character or a closing semi-colon is read. This is most likely to happen when reading in a schema file containing comments. This issue is specific to the sqlcmd utility.

A fix for this condition is planned for an upcoming point release

VoltDB currently intercepts assertions as part of its handling of stored procedures. Attempts to use assertions in stored procedures for debugging or to find programmatic errors will not work as expected.

The UPPER() and LOWER() functions return a string converted to all uppercase or all lowercase letters, respectively. However, for the initial release, these functions only operate on characters in the ASCII character set. Other case-sensitive UTF-8 characters in the string are returned unchanged. Support for all case-sensitive UTF-8 characters will be included in a future release.

There is a problem with how the math library used to build the C++ client library handles large decimal values on 32-bit operating systems. As a result, the C++ library cannot serialize and pass Decimal datatypes reliably on these systems.

Note that the C++ client interface can send and receive Decimal values properly on 64-bit platforms.

Enabling SNMP can take up to 2 minutes to complete. This delay does not always occur and can vary in length. If SNMP is enabled when the database server starts, the delay occurs after the server logs the message "Initializing SNMP" and before it attempts to connect to the cluster. If you enable SNMP while the database is running, the delay can occur when you issue the voltadmin update command or modify the setting in the VoltDB Management Center Admin tab. This issue results from a Java constraint related to secure random numbers used by the SNMP library.

With VoltDB V7.0, cross-datacenter replication (XDCR) supports multiple clusters in an XDCR network. However, the VoltDB Management Center currently reports on only one such connection per cluster. In the future, the Management Center will provide monitoring and statistics for all connections to the current cluster.

Any time the database schema or stored procedures are changed, the data table showing stored procedure statistics at the bottom of the Monitor section of the VoltDB Management Center get reset. As soon as new invocations of the stored procedures occur, the statistics table will show new values based on performance after the schema update. Until invocations occur, the procedure table is blank.

The ASSUMEUNIQUE attribute is designed for identifying columns in partitioned tables where the column values are known to be unique but the table is not partitioned on that column, so VoltDB cannot verify complete uniqueness across the database. Using interactive DDL, you can create a table with a column marked as ASSUMEUNIQUE, but if you try to partition the table on the ASSUMEUNIQUE column, you receive an error. The solution is to drop and add the column using the UNIQUE attribute instead of ASSUMEUNIQUE.

You cannot add or remove a column constraint such as UNIQUE or ASSUMEUNIQUE using the ALTER TABLE ALTER COLUMN statement. Instead to add or remove such constraints, you must first drop then add the modified column. For example:

ALTER TABLE employee DROP COLUMN empID;
ALTER TABLE employee ADD COLUMN empID INTEGER UNIQUE;

For partitioned tables, the value of the column used to partition the table determines what partition the row belongs to. If you use UPDATE to change this value and the new value belongs in a different partition, the UPDATE request will fail and the stored procedure will be rolled back.

Updating the partition column value may or may not cause the record to be repartitioned (depending on the old and new values). However, since you cannot determine if the update will succeed or fail, you should not use UPDATE to change the value of partitioning columns.

The workaround, if you must change the value of the partitioning column, is to use both a DELETE and an INSERT statement to explicitly remove and then re-insert the desired rows.

If you refer to a table or column name that does not exist, VoltDB reports that the "user lacks privilege or object not found". This can happen, for example, if you misspell a table or column name.

Another situation where this occurs is if you mistakenly use double quotation marks to enclose a string literal (such as WHERE ColumnA="True"). ANSI SQL requires single quotes for string literals and reserves double quotes for object names. In the preceding example, VoltDB interprets "True" as an object name, cannot resolve it, and issues the "user lacks privilege" error.

The workaround is, if you receive this error, to look for misspelled table or columns names or string literals delimited by double quotes in the offending SQL statement.

Starting with VoltDB 6.0, ambiguous column references are no longer allowed. For example, if both the Customer and Placedorder tables have a column named Address, the reference to Address in the following SELECT statement is ambiguous:

SELECT OrderNumber, Address FROM Customer, Placedorder
   . . .

Previously, VoltDB would select the column from the leftmost table (Customer, in this case). Ambiguous column references are no longer allowed and you must use table prefixes to disambiguate identical column names. For example, specifying the column in the preceding statement as Customer.Address.

A corollary to this change is that a column declared in a USING clause can now be referenced using a prefix. For example, the following statement uses the prefix Customer.Address to disambiguate the column selection from a possibly similarly named column belonging to the Supplier table:

SELECT OrderNumber, Vendor, Customer.Address
   FROM Customer, Placedorder Using (Address), Supplier
    . . .

VoltDB opens a file descriptor for every client connection to the database. In normal operation, this use of file descriptors is transparent to the user. However, if there are an inordinate number of concurrent client connections, or clients open and close many connections in rapid succession, it is possible for VoltDB to exceed the process limit on file descriptors. When this happens, new connections may be rejected or other disk-based activities (such as snapshotting) may be disrupted.

In environments where there are likely to be an extremely large number of connections, you should consider increasing the operating system's per-process limit on file descriptors.